Stuck on an issue?

Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.

And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.

image etched to 64gb sd card, will not boot.. same image to 32gb card works okl

See original GitHub issue

Etcher version: 1.5.4
Operating system and architecture: WIndows 10 64bit
Image flashed: nvidia jetson nano https://developer.nvidia.com/embedded/dlc/jetson-nano-dev-kit-sd-card-image
Do you see any meaningful error information in the DevTools? no… says completed ok

Issue Analytics

State:
Created 4 years ago
Comments:22 (7 by maintainers)

Top GitHub Comments

1reaction

talkingtabcommented, May 9, 2019

I have a jetson nano, used etcher on my mac to flash the image onto a 64G card and it was able to boot just fine.

One thing is that I did not unzip the nano image file, just selected the zip file with etcher.

0reactions

talkingtabcommented, May 13, 2019

Not sure I got the release info right in some of the earlier messages. In any case I have 1.4.9, 1.5.24 and 1.5.35. I tested the nano file extracted from the zip to an .img and successfully booted the SD card on all versions. This is on a Mac running 10.14.1 Thanks @lurch for the help getting 1.5.35.