Stuck on an issue?

Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.

And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.

[Support]: Recordings just stop and won't recover until restart

See original GitHub issue

Describe the problem you are having

I’ve noticed some weird pattern recently with my Reolink E1 Zoom cameras. I’ve got the reolink cameras setup as recommended in the documentation but still seeing the behaviour. More often than not, recordings stop around 2:15am and by the time I wake up I can’t see any logs so it’s difficult to diagnose the issue. I’ve done some scowering but can’t seem to find a way to save logs to a file for review later so I’m wondering if this is achievable so I can check the logs once I’ve woken up and confirmed it happened again?

Once this has happened, recordings won’t resume again until I have restarted the frigate container. Just toggling the recording switch doesn’t start it up again.

Version

0.10.0-bfecee9

Frigate config file

logger:
  default: debug
  logs:
    peewee: info
mqtt:
  host: <redacted>
  port: 1883
  topic_prefix: frigate
  client_id: frigate
  user: <redacted>
  password: <redacted>
  stats_interval: 60
cameras:
  living_room:
    ffmpeg:
      inputs:
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=user&password=pass
          roles:
            - rtmp
            - record
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=user&password=pass
          roles:
            - detect
      output_args:    
        record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
      input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer+genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
    detect:
      width: 896
      height: 672
      fps: 5
      max_disappeared: 25
    record:
      enabled: true
      retain:
        days: 7
        mode: all
      events:
        pre_capture: 3
        post_capture: 3
        objects:
          - person
          - cat
        retain:
          default: 365
          mode: active_objects
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 10
        objects:
          person: 14
    objects:
      track:
        - person
        - cat   
    motion:
      mask:
        - 2518,50,2516,124,1733,127,1739,48
  front_bedroom:
    ffmpeg:
      inputs:
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=user&password=pass
          roles:
            - rtmp
            - record
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=user&password=pass
          roles:
            - detect
      output_args:    
        record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
      input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer+genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
    detect:
      width: 896
      height: 672
      fps: 5
      max_disappeared: 25
    record:
      enabled: true
      retain:
        days: 7
        mode: all
      events:
        pre_capture: 3
        post_capture: 3
        objects:
          - person
          - cat
        retain:
          default: 365
          mode: active_objects
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 10
        objects:
          person: 14
    objects:
      track:
        - person
        - cat   
    motion:
      mask:
        - 2518,50,2516,124,1733,127,1739,48
  back_bedroom:
    ffmpeg:
      inputs:
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=user&password=pass
          roles:
            - rtmp
            - record
        - path: http://<ip>/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=user&password=pass
          roles:
            - detect
      output_args:    
        record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
      input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer+genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
    detect:
      width: 896
      height: 672
      fps: 5
      max_disappeared: 25
    record:
      enabled: true
      retain:
        days: 7
        mode: all
      events:
        pre_capture: 3
        post_capture: 3
        objects:
          - person
          - cat
        retain:
          default: 365
          mode: active_objects
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 10
        objects:
          person: 14
    objects:
      track:
        - person
        - cat   
    motion:
      mask:
        - 2518,50,2516,124,1733,127,1739,48
  feeder:
    ffmpeg:
      inputs:
        - path: http://<ip>:8081
          roles:
            - record  
            - detect
      output_args:    
        record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v libx264 -an
      input_args:
        - -avoid_negative_ts
        - make_zero
        - -fflags
        - nobuffer
        - -flags
        - low_delay
        - -strict
        - experimental
        - -fflags
        - +genpts+discardcorrupt
        - -r
        - "3" # <---- adjust depending on your desired frame rate from the mjpeg image
        - -use_wallclock_as_timestamps
        - "1"
    detect:
      enabled: false
      width: 640
      height: 480
      fps: 5
      max_disappeared: 25
    record:
      enabled: true
      retain:
        days: 0
        mode: all
      events:
        pre_capture: 3
        post_capture: 3
        objects:
          - person
          - cat
        retain:
          default: 7
          mode: active_objects
    rtmp:
      enabled: false
    snapshots:
      enabled: false
      timestamp: true
      bounding_box: true
      retain:
        default: 10
        objects:
          person: 14   
  doorbell:
    ffmpeg:
      inputs:
        - path: rtsp://user:pass@<ip>:554
          roles:
            - rtmp
            - record
        - path: rtsp://user:pass@<ip>:554/cam/realmonitor?channel=1&subtype=1
          roles:
            - detect
      output_args:
        record: -f segment -segment_time 60 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    detect:
      width: 720
      height: 576
      fps: 5      
      max_disappeared: 25
    record:
      enabled: true
      retain:
        days: 21
        mode: all
      events:
        pre_capture: 5
        post_capture: 5
        objects:
          - person
          - cat
        retain:
          default: 365
          mode: active_objects
    snapshots:
      enabled: true
      timestamp: true
      bounding_box: true
      retain:
        default: 10
        objects:
          person: 14
    motion:
      mask:
        - 62,365,145,376,230,353,497,361,583,430,720,418,720,165,720,127,720,0,0,0,0,318
    zones: 
      driveway:
        coordinates: 720,503,720,576,720,576,0,576,77,417,164,358,208,340,342,364,469,372,603,491
    objects:
      filters:
        person:
          mask:
            - 606,375,541,377,467,364,329,357,248,351,171,333,100,322,0,296,0,0,720,0,720,354
      track:
        - person
        - cat
detectors:
  coral:
    type: edgetpu
    device: usb
birdseye:
  enabled: true
  mode: continuous
  height: 1080
  width: 1920

Relevant log output

Can't access

FFprobe output from your camera

Detect URL
Input #0, flv, from 'http://<ip>/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=user&password=pass':
  Metadata:
    displayWidth    : 896
    displayHeight   : 672
  Duration: 00:00:00.00, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: h264 (High), yuv420p(progressive), 896x672, 11 fps, 12 tbr, 1k tbn
  Stream #0:1: Audio: aac (LC), 16000 Hz, mono, fltp

Recording URL 
Input #0, flv, from 'http://<ip>/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=user&password=pass':
  Metadata:
    displayWidth    : 2560
    displayHeight   : 1920
  Duration: 00:00:00.00, start: 0.000000, bitrate: N/A
  Stream #0:0: Video: h264 (High), yuv420p(progressive), 2560x1920, 11 fps, 12 tbr, 1k tbn
  Stream #0:1: Audio: aac (LC), 16000 Hz, mono, fltp

Frigate stats

{
    "back_bedroom": {
        "camera_fps": 5.0,
        "capture_pid": 241,
        "detection_fps": 0.0,
        "pid": 231,
        "process_fps": 5.0,
        "skipped_fps": 0.0
    },
    "detection_fps": 0.0,
    "detectors": {
        "coral": {
            "detection_start": 0.0,
            "inference_speed": 10.18,
            "pid": 217
        }
    },
    "doorbell": {
        "camera_fps": 5.1,
        "capture_pid": 254,
        "detection_fps": 0.0,
        "pid": 234,
        "process_fps": 5.1,
        "skipped_fps": 0.0
    },
    "feeder": {
        "camera_fps": 8.3,
        "capture_pid": 244,
        "detection_fps": 0.0,
        "pid": 233,
        "process_fps": 8.3,
        "skipped_fps": 0.0
    },
    "front_bedroom": {
        "camera_fps": 5.0,
        "capture_pid": 237,
        "detection_fps": 0.0,
        "pid": 228,
        "process_fps": 5.0,
        "skipped_fps": 0.0
    },
    "living_room": {
        "camera_fps": 5.1,
        "capture_pid": 236,
        "detection_fps": 0.0,
        "pid": 226,
        "process_fps": 5.1,
        "skipped_fps": 0.0
    },
    "service": {
        "storage": {
            "/dev/shm": {
                "free": 263.6,
                "mount_type": "tmpfs",
                "total": 268.4,
                "used": 4.8
            },
            "/media/frigate/clips": {
                "free": 182073.5,
                "mount_type": "fuseblk",
                "total": 1000186.3,
                "used": 818112.8
            },
            "/media/frigate/recordings": {
                "free": 182073.5,
                "mount_type": "fuseblk",
                "total": 1000186.3,
                "used": 818112.8
            },
            "/tmp/cache": {
                "free": 17391.2,
                "mount_type": "overlay",
                "total": 121029.6,
                "used": 97446.3
            }
        },
        "temperatures": {},
        "uptime": 21286,
        "version": "0.10.0-bfecee9"
    }
}

Operating system

Debian

Install method

Docker CLI

Coral version

USB

Network connection

Wired

Camera make and model

Reolink E1 Zoom

Any other information that may be helpful

Relevant cameras in the config file are front_bedroom back_bedroom and living_room

Issue Analytics

State:
Created 2 years ago
Comments:26 (5 by maintainers)

Top GitHub Comments

2reactions

NickM-27commented, Dec 17, 2022

You can follow the progress here: https://github.com/blakeblackshear/frigate/pull/4055 there will be a beta before release

You can use the dev images from here: https://github.com/blakeblackshear/frigate/pkgs/container/frigate but do be aware that there may be bugs and the changes are undocumented (besides the source code itself)

1reaction

NickM-27commented, Dec 6, 2022

As the documentation reads as these are additional args, not full replacement of existing args?

They are replacements, if they were additional then the args would be doubled up since the ones you included are also part of the default list.

an example of this is found here: https://docs.frigate.video/faqs#audio-in-recordings where it is suggested that you have to replace all the args to enable audio (instead of just adding -c:a aac)

Top Results From Across the Web

Fix issues with your U-verse TV recordings - AT&T

Try these quick tips: Restart your U-verse TV receiver (DVR) by holding down the POWER button for 5 seconds, then press it again...

Voice memos is not saved after i done recording

Hello, i've been searching for this problem but i didn't find any solutions. There are only an unanswered one.

DVR Troubleshooting | Spectrum Support

The series recording may be set up to record only new episodes. ... You can get support, troubleshoot your services and reset your...

Restart Your X1 TV Box - Xfinity Support

Your TV and recordings will be unavailable until the Refresh or Restart is complete. Restart From the Xfinity My Account App. Open the...

Record a meeting in Teams - Microsoft Support

Stop transcription: Stops just the live transcription. The recording continues until you select Stop recording. Find recordings. Recordings are available in ...