tuya-cli link hangs and times out at "Registering device(s)..."

I’ve followed the setup directions up to step 5, but spinner hangs on Registering devices(s)... and eventually throws ✖ Device(s) failed to be registered! Error: Timed out waiting for devices to connect.

I’m sure I am using the correct inputs because I’m still able to connect it to the Tuya Smart app fine.

I even tried increasing the timeout directly in the source to some really high number, but that didn’t seem to have any effect.

It’s quite curious because, very occasionally (~10% of the tries), when running the tuya-cli link ... command, I will hear my device make noises which match the noises it makes when I successfully connect it to the Tuya Smart app (presumably a test for turning on/off the power). But even after tuya-cli link instigates this, nothing happens and the timeout error is subsequently thrown :\

@codetheweb do you or anyone have advice on how to troubleshoot this? I’m willing to provide any additional info you might need. Thanks!

Desktop (please complete the following information):

• OS: macOS 10.15.3
• Node: 13.7.0

[roelf1978]

@FearNaBoinne Thanks. Also changed from network and now it works!

[FearNaBoinne]

Geinstalleerd op RPI

Iemand een idee hoe dit op te lossen?

Remove the square brackets… They’re used in the example to indicate a value, but should NOT be in the actual command… (It’s a standard notation signifying mandatory values…)

(PS: Using English, so others can understand the reply as well)