Teckin SP20 First flash - No LED no AP

Fresh Raspbian image. I ran

sudo update && sudo apt upgrade
sudo apt dist-upgrade
sudo shutdown -r now
cd ~
git clone https://github.com/ct-Open-Source/tuya-convert.git
cd tuya-convert
./install_prereq.sh
./start_flash.sh
> yes
- Connect phone to vtrust
> Enter
> ............................................................
Says to type `curl http://10.42.42.42/flash3`
Wait for snonoff-xxxx AP - Never happened, no LED

No AP was created, the LED was off. I unplugged/plugged the device and now it blinks red/blue 1 time at boot and then blue once. Then no LED.

I saw some python error in the logs 😢 EDIT: Maybe it’s when I cancelled the script?

Teckin SP20 (US)

Logs: https://transfer.sh/gdOGS/smarthack-wifi.log https://transfer.sh/Hd2RM/smarthack-web.log https://transfer.sh/C0yHH/smarthack-mqtt.log

I also did try a lot with digiblurDIY discord folks.

• Tried pressing the button, insert the plug and wait, nothing
• Tried tuya-convert again, never found the device
• Tried scanning wifi signals with JAWS, didn’t find anything

The backup made in ./tuya-convert was only 8192 bytes.

[kueblc]

Closing due to inactivity, please feel free to reopen if there are further concerns

[kueblc]

You should be able to flash it, but I can’t make any guarantees. If you do manage to wire one up, make a firmware backup before flashing and we can use that to debug what went wrong.