Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.
And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.
Daikin BRP15B61 incorrect fan modes
See original GitHub issueThe problem
The Daikin integration is reporting the following fan modes are available:
fan_modes: Low, Mid, High, Low/Auto, Mid/Auto, High/Auto
When in fact only the following modes are available from the BRP15B61 device:
Low, Mid, High, Auto
The Airbase app only cycles through these 4 modes.
When attempting to set any of the erroneously available auto modes via the thermostat card the actual fan state is set to the following:
Low/Auto --> Low Mid/Auto --> Mid High/Auto --> High
So there is no way to select Auto fan mode.
UPDATE: from the discussion below, it is using the BRP15B61 wifi controller with the BRC1E63 wall panel that is reporting the wrong fan modes in the integration. Other wall controllers like the BRC24Z8A do not have this issue (they support the three xxx/auto modes).
What is version of Home Assistant Core has the issue?
core-2021.6.6
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant OS
Integration causing the issue
Daikin
Link to integration documentation on our website
https://www.home-assistant.io/integrations/daikin/
Example YAML snippet
No response
Anything in the logs that might be useful for us?
No response
Additional information
Other than being unable to set Auto fan mode everything else appears to be functioning perfectly.
Issue Analytics
- State:
- Created 2 years ago
- Comments:43 (2 by maintainers)
Top Results From Across the Web
Top Related Medium Post
Top Related StackOverflow Question
Troubleshoot Live Code
Top Related Reddit Thread
Top Related Hackernoon Post
Top Related Tweet
Top Related Dev.to Post
Top Related Hashnode Post
All good @tomlut. To be clear, the issue remains. The integration’s Auto function cannot be used with that controller, as you explained in detail in your original post. The controller only allows for a single Auto level but the integration does not support this.
Hey all,
Sorry my email GitHub notifications were going to Junk so apologies for not responding - let me digest what’s going on and see if I can help.
FWIW I’ve noticed some odd behaviour since installing the 1.1.8 firmware - my fan speeds are now reporting some odd things (eg I have a 0 speed showing up as a fan speed that hasn’t been there until then).