Pentair Screenlogic Integration: Add Freeze Mode sensor

The problem

The current integration does not display freeze mode nformation. According to the developer of screenlogicpy the following is already available just not being addressed by the plugin…

Both the current Freeze Mode state and which circuits are set to turn on in freeze mode are already available in the JSON output.

For the freeze mode state, that value is under the config->freeze_mode->value key. I assume 1 is “Yes” and 0 is “No”.

For the individual circuits, the flags key in each circuit will read a 1 if yes, and a 0 if no. I’m not sure though if that is a true bitwise field or just the freeze mode state. Assigning the term flags was purely based on how other projects have labeled it. I don’t have any info on what other flags might get set there.

Can we get the integration update to add these entities when the integration is implemented? If not how do I find and alter the inegration to display them in HA

What version of Home Assistant Core has the issue?

12.8

What was the last working version of Home Assistant Core?

none

What type of installation are you running?

Home Assistant Core

Integration causing the issue

Pentair Screenlogic

Link to integration documentation on our website

No response

Diagnostics information

N/A

Example YAML snippet

N/A

Anything in the logs that might be useful for us?

N/A

Additional information

none

[dieselrabbit]

@home-assistant rename Pentair Screenlogic Integration: Add Freeze Mode sensor

[farberm]

Here is the diagnostic data. Sorry for the delay but I had to wait for it to get warm enough for freeze mode off. I think it reads freeze mode off value =0 , but freeze mode on value =8?

Sorry for the noob question but how do I create thensensor to show the state?

Sent from my iPad

On Dec 22, 2022, at 10:43 AM, Kevin Worrel @.***> wrote:

Diagnostic data from the ScreenLogic integration would be helpful in confirming that data point is actually updating when you expect it to. Download once when you see freeze mode off and once when it is on, (but at a minimum, when it is active) and attach them both here. If that is the data point you’re looking for, it should be trivial to expose it as a binary_sensor in HA. See here for how to download diagnostic data: https://www.home-assistant.io/docs/configuration/troubleshooting/#download-diagnostics Also, I am the developer of screenlogicpy as well. =)

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.

{ “home_assistant”: { “installation_type”: “Home Assistant OS”, “version”: “2022.12.8”, “dev”: false, “hassio”: true, “virtualenv”: false, “python_version”: “3.10.7”, “docker”: true, “arch”: “aarch64”, “timezone”: “America/New_York”, “os_name”: “Linux”, “os_version”: “5.15.76-v8”, “supervisor”: “2022.11.2”, “host_os”: “Home Assistant OS 9.4”, “docker_version”: “20.10.19”, “chassis”: “embedded”, “run_as_root”: true }, “custom_components”: { “alarmdotcom”: { “version”: “0.2.17”, “requirements”: [ “beautifulsoup4>=4.10.0”, “pyalarmdotcomajax==0.4.7” ] }, “dual_smart_thermostat”: { “version”: “0.5.5”, “requirements”: [] }, “watchman”: { “version”: “0.5.1”, “requirements”: [ “prettytable==3.0.0” ] }, “dwains_dashboard”: { “version”: “3.3.0”, “requirements”: [] }, “hacs”: { “version”: “1.29.0”, “requirements”: [ “aiogithubapi>=22.10.1” ] }, “securityspy”: { “version”: “1.1.5”, “requirements”: [ “pysecspy==1.3.5” ] }, “multiscrape”: { “version”: “6.5.0”, “requirements”: [ “lxml==4.9.1”, “beautifulsoup4==4.11.1” ] }, “monitor_docker”: { “version”: “1.10”, “requirements”: [ “aiodocker==0.21.0”, “python-dateutil==2.8.2” ] }, “mail_and_packages”: { “version”: “0.3.5-b20”, “requirements”: [ “beautifulsoup4”, “Pillow>=9.0” ] }, “localtuya”: { “version”: “4.1.1”, “requirements”: [] }, “unifigateway”: { “version”: “0.3.3”, “requirements”: [ “pyunifi==2.21” ] }, “iphonedetect”: { “version”: “1.4.0”, “requirements”: [] }, “whistle”: { “version”: “0.1.10”, “requirements”: [ “pywhistle==0.0.2” ] }, “icloud3”: { “version”: “2.4.6”, “requirements”: [] }, “ultrasync”: { “version”: “1.0.0”, “requirements”: [ “ultrasync==0.9.5” ] }, “intellicenter”: { “version”: “1.4.0”, “requirements”: [] }, “braviatv_psk”: { “version”: “0.4.2”, “requirements”: [ “pySonyBraviaPSK==0.2.4” ] }, “duke_energy_gateway”: { “version”: “0.1.2”, “requirements”: [ “pyduke-energy==1.0.2” ] } }, “integration_manifest”: { “domain”: “screenlogic”, “name”: “Pentair ScreenLogic”, “config_flow”: true, “documentation”: “https://www.home-assistant.io/integrations/screenlogic”, “requirements”: [ “screenlogicpy==0.5.4” ], “codeowners”: [ @.", @." ], “dhcp”: [ { “registered_devices”: true }, { “hostname”: “pentair*”, “macaddress”: “00C033*” } ], “iot_class”: “local_polling”, “loggers”: [ “screenlogicpy” ], “is_built_in”: true }, “data”: { “config_entry”: { “entry_id”: “fb331a93a6d4f24c33daa01ad17cd375”, “version”: 1, “domain”: “screenlogic”, “title”: “Pentair: EC-C0-D0”, “data”: { “ip_address”: “192.168.2.21”, “port”: 80 }, “options”: { “scan_interval”: 30 }, “pref_disable_new_entities”: false, “pref_disable_polling”: false, “source”: “user”, “unique_id”: “00:c0:33:ec:c0:d0”, “disabled_by”: null }, “data”: { “config”: { “controller_id”: { “name”: “Controller ID”, “value”: 100 }, “is_celsius”: { “name”: “Is Celsius”, “value”: 0 }, “controller_type”: 5, “hardware_type”: 0, “controller_buffer”: 0, “equipment_flags”: 32816, “generic_circuit_name”: { “name”: “Default Circuit Name”, “value”: “Water Features” }, “circuit_count”: { “name”: “Number of Circuits”, “value”: 15 }, “color_count”: { “name”: “Number of Colors”, “value”: 8 }, “colors”: [ { “name”: “White”, “value”: [ 255, 255, 255 ] }, { “name”: “Light Green”, “value”: [ 160, 255, 160 ] }, { “name”: “Green”, “value”: [ 0, 255, 80 ] }, { “name”: “Cyan”, “value”: [ 0, 255, 200 ] }, { “name”: “Blue”, “value”: [ 100, 140, 255 ] }, { “name”: “Lavender”, “value”: [ 230, 130, 255 ] }, { “name”: “Magenta”, “value”: [ 255, 0, 128 ] }, { “name”: “Light Magenta”, “value”: [ 255, 180, 210 ] } ], “interface_tab_flags”: 127, “show_alarms”: 1, “ok”: { “name”: “OK Check”, “value”: 1 }, “freeze_mode”: { “name”: “Freeze Mode”, “value”: 0 }, “remotes”: { “name”: “Remotes”, “value”: 0 }, “pool_delay”: { “name”: “Pool Delay”, “value”: 0 }, “spa_delay”: { “name”: “Spa Delay”, “value”: 0 }, “cleaner_delay”: { “name”: “Cleaner Delay”, “value”: 0 } }, “bodies”: { “0”: { “min_set_point”: { “name”: “Pool Minimum Set Point”, “value”: 40, “unit”: “\u00b0F” }, “max_set_point”: { “name”: “Pool Minimum Set Point”, “value”: 104, “unit”: “\u00b0F” }, “body_type”: { “name”: “Type of body of water”, “value”: 0 }, “last_temperature”: { “name”: “Last Pool Temperature”, “value”: 39, “unit”: “\u00b0F”, “device_type”: “temperature” }, “heat_status”: { “name”: “Pool Heat”, “value”: 0 }, “heat_set_point”: { “name”: “Pool Heat Set Point”, “value”: 83, “unit”: “\u00b0F”, “device_type”: “temperature” }, “cool_set_point”: { “name”: “Pool Cool Set Point”, “value”: 96, “unit”: “\u00b0F” }, “heat_mode”: { “name”: “Pool Heat Mode”, “value”: 0 } }, “1”: { “min_set_point”: { “name”: “Spa Minimum Set Point”, “value”: 40, “unit”: “\u00b0F” }, “max_set_point”: { “name”: “Spa Minimum Set Point”, “value”: 104, “unit”: “\u00b0F” }, “body_type”: { “name”: “Type of body of water”, “value”: 1 }, “last_temperature”: { “name”: “Last Spa Temperature”, “value”: 30, “unit”: “\u00b0F”, “device_type”: “temperature” }, “heat_status”: { “name”: “Spa Heat”, “value”: 2 }, “heat_set_point”: { “name”: “Spa Heat Set Point”, “value”: 46, “unit”: “\u00b0F”, “device_type”: “temperature” }, “cool_set_point”: { “name”: “Spa Cool Set Point”, “value”: 37, “unit”: “\u00b0F” }, “heat_mode”: { “name”: “Spa Heat Mode”, “value”: 3 } } }, “circuits”: { “500”: { “id”: 500, “name”: “Spa”, “name_index”: 71, “function”: 1, “interface”: 1, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 1, “default_rt”: 720, “value”: 1, “delay”: 0 }, “501”: { “id”: 501, “name”: “Aux 1”, “name_index”: 2, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 2, “default_rt”: 720, “value”: 0, “delay”: 0 }, “502”: { “id”: 502, “name”: “Lights”, “name_index”: 46, “function”: 9, “interface”: 4, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 3, “default_rt”: 720, “value”: 0, “delay”: 0 }, “503”: { “id”: 503, “name”: “Jets”, “name_index”: 45, “function”: 0, “interface”: 2, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 4, “default_rt”: 720, “value”: 0, “delay”: 0 }, “504”: { “id”: 504, “name”: “Fountain”, “name_index”: 34, “function”: 13, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 5, “default_rt”: 720, “value”: 0, “delay”: 0 }, “505”: { “id”: 505, “name”: “Pool”, “name_index”: 60, “function”: 2, “interface”: 0, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 6, “default_rt”: 720, “value”: 1, “delay”: 0 }, “507”: { “id”: 507, “name”: “Cleaner”, “name_index”: 21, “function”: 5, “interface”: 5, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 8, “default_rt”: 720, “value”: 0, “delay”: 0 }, “508”: { “id”: 508, “name”: “SPA WAT HI”, “name_index”: 96, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 9, “default_rt”: 720, “value”: 0, “delay”: 0 }, “509”: { “id”: 509, “name”: “Aux 8”, “name_index”: 9, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 10, “default_rt”: 720, “value”: 0, “delay”: 0 }, “540”: { “id”: 540, “name”: “Spa Waterfall”, “name_index”: 77, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 41, “default_rt”: 720, “value”: 0, “delay”: 0 }, “541”: { “id”: 541, “name”: “Spa High”, “name_index”: 72, “function”: 0, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 42, “default_rt”: 720, “value”: 0, “delay”: 0 }, “542”: { “id”: 542, “name”: “SPA MED”, “name_index”: 93, “function”: 0, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 43, “default_rt”: 720, “value”: 0, “delay”: 0 }, “543”: { “id”: 543, “name”: “PARTY”, “name_index”: 94, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 44, “default_rt”: 720, “value”: 0, “delay”: 0 }, “545”: { “id”: 545, “name”: “Fountain 1”, “name_index”: 35, “function”: 13, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 46, “default_rt”: 720, “value”: 0, “delay”: 0 }, “546”: { “id”: 546, “name”: “spa spill v”, “name_index”: 95, “function”: 13, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 47, “default_rt”: 720, “value”: 0, “delay”: 0 } }, “pumps”: { “0”: { “data”: 134, “name”: “Pool Pump”, “pumpType”: 2, “state”: 1, “currentWatts”: { “name”: “Pool Pump Current Watts”, “value”: 632, “unit”: “W”, “device_type”: “energy” }, “currentRPM”: { “name”: “Pool Pump Current RPM”, “value”: 1950, “unit”: “rpm” }, “presets”: { “0”: { “cid”: 6, “setPoint”: 1950, “isRPM”: 1 }, “1”: { “cid”: 0, “setPoint”: 2200, “isRPM”: 1 }, “2”: { “cid”: 5, “setPoint”: 2220, “isRPM”: 1 }, “3”: { “cid”: 159, “setPoint”: 2960, “isRPM”: 1 }, “4”: { “cid”: 44, “setPoint”: 3320, “isRPM”: 1 }, “5”: { “cid”: 9, “setPoint”: 3200, “isRPM”: 1 }, “6”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “7”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 } } }, “1”: { “data”: 129, “name”: “Spa Pump”, “pumpType”: 2, “state”: 1, “currentWatts”: { “name”: “Spa Pump Current Watts”, “value”: 254, “unit”: “W”, “device_type”: “energy” }, “currentRPM”: { “name”: “Spa Pump Current RPM”, “value”: 1750, “unit”: “rpm” }, “presets”: { “0”: { “cid”: 1, “setPoint”: 1750, “isRPM”: 1 }, “1”: { “cid”: 156, “setPoint”: 1750, “isRPM”: 1 }, “2”: { “cid”: 4, “setPoint”: 2000, “isRPM”: 1 }, “3”: { “cid”: 42, “setPoint”: 3100, “isRPM”: 1 }, “4”: { “cid”: 43, “setPoint”: 2500, “isRPM”: 1 }, “5”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “6”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “7”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 } } }, “2”: { “data”: 0 }, “3”: { “data”: 0 }, “4”: { “data”: 0 }, “5”: { “data”: 0 }, “6”: { “data”: 0 }, “7”: { “data”: 0 } }, “sensors”: { “air_temperature”: { “name”: “Air Temperature”, “value”: 37, “unit”: “\u00b0F”, “device_type”: “temperature” }, “ph”: { “name”: “pH”, “value”: 7.69, “unit”: “pH” }, “orp”: { “name”: “ORP”, “value”: 321, “unit”: “mV” }, “saturation”: { “name”: “Saturation Index”, “value”: -0.59, “unit”: “lsi” }, “salt_ppm”: { “name”: “Salt”, “value”: 0, “unit”: “ppm” }, “ph_supply_level”: { “name”: “pH Supply Level”, “value”: 3 }, “orp_supply_level”: { “name”: “ORP Supply Level”, “value”: 7 }, “chem_alarm”: { “name”: “Chemistry Alarm”, “value”: 1, “device_type”: “alarm” } }, “chemistry”: { “current_ph”: { “name”: “Current pH”, “value”: 7.69, “unit”: “pH” }, “current_orp”: { “name”: “Current ORP”, “value”: 321, “unit”: “mV” }, “ph_setpoint”: { “name”: “pH Setpoint”, “value”: 7.4, “unit”: “pH” }, “orp_setpoint”: { “name”: “ORP Setpoint”, “value”: 630, “unit”: “mV” }, “ph_last_dose_time”: { “name”: “Last pH Dose Time”, “value”: 35, “unit”: “Sec” }, “orp_last_dose_time”: { “name”: “Last ORP Dose Time”, “value”: 461, “unit”: “Sec” }, “ph_last_dose_volume”: { “name”: “Last pH Dose Volume”, “value”: 99, “unit”: “mL” }, “orp_last_dose_volume”: { “name”: “Last ORP Dose Volume”, “value”: 0, “unit”: “mL” }, “ph_supply_level”: { “name”: “pH Supply Level”, “value”: 3 }, “orp_supply_level”: { “name”: “ORP Supply Level”, “value”: 7 }, “saturation”: { “name”: “Saturation Index”, “value”: -0.59, “unit”: “lsi” }, “calcium_harness”: { “name”: “Calcium Hardness”, “value”: 250, “unit”: “ppm” }, “cya”: { “name”: “Cyanuric Acid”, “value”: 18, “unit”: “ppm” }, “total_alkalinity”: { “name”: “Total Alkalinity”, “value”: 90, “unit”: “ppm” }, “salt_tds_ppm”: { “name”: “Salt/TDS”, “value”: 1000, “unit”: “ppm” }, “ph_probe_water_temp”: { “name”: “pH Probe Water Temperature”, “value”: 30, “unit”: “\u00b0F”, “device_type”: “temperature” }, “alerts”: { “flow_alarm”: { “name”: “Flow Alarm”, “value”: 0, “device_type”: “alarm” }, “ph_alarm”: { “name”: “pH Alarm”, “value”: 0, “device_type”: “alarm” }, “orp_alarm”: { “name”: “ORP Alarm”, “value”: 0, “device_type”: “alarm” }, “ph_supply_alarm”: { “name”: “pH Supply Alarm”, “value”: 0, “device_type”: “alarm” }, “orp_supply_alarm”: { “name”: “ORP Supply Alarm”, “value”: 0, “device_type”: “alarm” }, “probe_fault_alarm”: { “name”: “Probe Fault”, “value”: 0, “device_type”: “alarm” } }, “notifications”: { “ph_lockout”: { “name”: “pH Lockout”, “value”: 0 }, “ph_limit”: { “name”: “pH Daily Limit Reached”, “value”: 0 }, “orp_limit”: { “name”: “ORP Daily Limit Reached”, “value”: 0 } }, “status”: 25, “ph_dosing_state”: { “name”: “pH Dosing State”, “value”: 1 }, “orp_dosing_state”: { “name”: “ORP Dosing State”, “value”: 0 }, “flags”: 32, “firmware”: { “name”: “IntelliChem Firmware Version”, “value”: “1.040” } }, “scg”: { “scg_present”: 0, “scg_status”: { “name”: “SCG Status”, “value”: 1 }, “scg_level1”: { “name”: “Pool SCG Level”, “value”: 50, “unit”: “%” }, “scg_level2”: { “name”: “Spa SCG Level”, “value”: 0, “unit”: “%” }, “scg_salt_ppm”: { “name”: “SCG Salt”, “value”: 0, “unit”: “ppm” }, “scg_flags”: 0, “scg_super_chlor_timer”: { “name”: “SCG Super Chlorination Timer”, “value”: 0 } } } } } { “home_assistant”: { “installation_type”: “Home Assistant OS”, “version”: “2022.12.8”, “dev”: false, “hassio”: true, “virtualenv”: false, “python_version”: “3.10.7”, “docker”: true, “arch”: “aarch64”, “timezone”: “America/New_York”, “os_name”: “Linux”, “os_version”: “5.15.76-v8”, “supervisor”: “2022.11.2”, “host_os”: “Home Assistant OS 9.4”, “docker_version”: “20.10.19”, “chassis”: “embedded”, “run_as_root”: true }, “custom_components”: { “alarmdotcom”: { “version”: “0.2.17”, “requirements”: [ “beautifulsoup4>=4.10.0”, “pyalarmdotcomajax==0.4.7” ] }, “dual_smart_thermostat”: { “version”: “0.5.5”, “requirements”: [] }, “watchman”: { “version”: “0.5.1”, “requirements”: [ “prettytable==3.0.0” ] }, “dwains_dashboard”: { “version”: “3.3.0”, “requirements”: [] }, “hacs”: { “version”: “1.29.0”, “requirements”: [ “aiogithubapi>=22.10.1” ] }, “securityspy”: { “version”: “1.1.5”, “requirements”: [ “pysecspy==1.3.5” ] }, “multiscrape”: { “version”: “6.5.0”, “requirements”: [ “lxml==4.9.1”, “beautifulsoup4==4.11.1” ] }, “monitor_docker”: { “version”: “1.10”, “requirements”: [ “aiodocker==0.21.0”, “python-dateutil==2.8.2” ] }, “mail_and_packages”: { “version”: “0.3.5-b20”, “requirements”: [ “beautifulsoup4”, “Pillow>=9.0” ] }, “localtuya”: { “version”: “4.1.1”, “requirements”: [] }, “unifigateway”: { “version”: “0.3.3”, “requirements”: [ “pyunifi==2.21” ] }, “iphonedetect”: { “version”: “1.4.0”, “requirements”: [] }, “whistle”: { “version”: “0.1.10”, “requirements”: [ “pywhistle==0.0.2” ] }, “icloud3”: { “version”: “2.4.6”, “requirements”: [] }, “ultrasync”: { “version”: “1.0.0”, “requirements”: [ “ultrasync==0.9.5” ] }, “intellicenter”: { “version”: “1.4.0”, “requirements”: [] }, “braviatv_psk”: { “version”: “0.4.2”, “requirements”: [ “pySonyBraviaPSK==0.2.4” ] }, “duke_energy_gateway”: { “version”: “0.1.2”, “requirements”: [ “pyduke-energy==1.0.2” ] } }, “integration_manifest”: { “domain”: “screenlogic”, “name”: “Pentair ScreenLogic”, “config_flow”: true, “documentation”: “https://www.home-assistant.io/integrations/screenlogic”, “requirements”: [ “screenlogicpy==0.5.4” ], “codeowners”: [ @.", @." ], “dhcp”: [ { “registered_devices”: true }, { “hostname”: “pentair*”, “macaddress”: “00C033*” } ], “iot_class”: “local_polling”, “loggers”: [ “screenlogicpy” ], “is_built_in”: true }, “data”: { “config_entry”: { “entry_id”: “fb331a93a6d4f24c33daa01ad17cd375”, “version”: 1, “domain”: “screenlogic”, “title”: “Pentair: EC-C0-D0”, “data”: { “ip_address”: “192.168.2.21”, “port”: 80 }, “options”: { “scan_interval”: 30 }, “pref_disable_new_entities”: false, “pref_disable_polling”: false, “source”: “user”, “unique_id”: “00:c0:33:ec:c0:d0”, “disabled_by”: null }, “data”: { “config”: { “controller_id”: { “name”: “Controller ID”, “value”: 100 }, “is_celsius”: { “name”: “Is Celsius”, “value”: 0 }, “controller_type”: 5, “hardware_type”: 0, “controller_buffer”: 0, “equipment_flags”: 32816, “generic_circuit_name”: { “name”: “Default Circuit Name”, “value”: “Water Features” }, “circuit_count”: { “name”: “Number of Circuits”, “value”: 15 }, “color_count”: { “name”: “Number of Colors”, “value”: 8 }, “colors”: [ { “name”: “White”, “value”: [ 255, 255, 255 ] }, { “name”: “Light Green”, “value”: [ 160, 255, 160 ] }, { “name”: “Green”, “value”: [ 0, 255, 80 ] }, { “name”: “Cyan”, “value”: [ 0, 255, 200 ] }, { “name”: “Blue”, “value”: [ 100, 140, 255 ] }, { “name”: “Lavender”, “value”: [ 230, 130, 255 ] }, { “name”: “Magenta”, “value”: [ 255, 0, 128 ] }, { “name”: “Light Magenta”, “value”: [ 255, 180, 210 ] } ], “interface_tab_flags”: 127, “show_alarms”: 1, “ok”: { “name”: “OK Check”, “value”: 1 }, “freeze_mode”: { “name”: “Freeze Mode”, “value”: 8 }, “remotes”: { “name”: “Remotes”, “value”: 0 }, “pool_delay”: { “name”: “Pool Delay”, “value”: 0 }, “spa_delay”: { “name”: “Spa Delay”, “value”: 0 }, “cleaner_delay”: { “name”: “Cleaner Delay”, “value”: 0 } }, “bodies”: { “0”: { “min_set_point”: { “name”: “Pool Minimum Set Point”, “value”: 40, “unit”: “\u00b0F” }, “max_set_point”: { “name”: “Pool Minimum Set Point”, “value”: 104, “unit”: “\u00b0F” }, “body_type”: { “name”: “Type of body of water”, “value”: 0 }, “last_temperature”: { “name”: “Last Pool Temperature”, “value”: 39, “unit”: “\u00b0F”, “device_type”: “temperature” }, “heat_status”: { “name”: “Pool Heat”, “value”: 0 }, “heat_set_point”: { “name”: “Pool Heat Set Point”, “value”: 83, “unit”: “\u00b0F”, “device_type”: “temperature” }, “cool_set_point”: { “name”: “Pool Cool Set Point”, “value”: 96, “unit”: “\u00b0F” }, “heat_mode”: { “name”: “Pool Heat Mode”, “value”: 0 } }, “1”: { “min_set_point”: { “name”: “Spa Minimum Set Point”, “value”: 40, “unit”: “\u00b0F” }, “max_set_point”: { “name”: “Spa Minimum Set Point”, “value”: 104, “unit”: “\u00b0F” }, “body_type”: { “name”: “Type of body of water”, “value”: 1 }, “last_temperature”: { “name”: “Last Spa Temperature”, “value”: 19, “unit”: “\u00b0F”, “device_type”: “temperature” }, “heat_status”: { “name”: “Spa Heat”, “value”: 2 }, “heat_set_point”: { “name”: “Spa Heat Set Point”, “value”: 46, “unit”: “\u00b0F”, “device_type”: “temperature” }, “cool_set_point”: { “name”: “Spa Cool Set Point”, “value”: 20, “unit”: “\u00b0F” }, “heat_mode”: { “name”: “Spa Heat Mode”, “value”: 3 } } }, “circuits”: { “500”: { “id”: 500, “name”: “Spa”, “name_index”: 71, “function”: 1, “interface”: 1, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 1, “default_rt”: 720, “value”: 1, “delay”: 0 }, “501”: { “id”: 501, “name”: “Aux 1”, “name_index”: 2, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 2, “default_rt”: 720, “value”: 0, “delay”: 0 }, “502”: { “id”: 502, “name”: “Lights”, “name_index”: 46, “function”: 9, “interface”: 4, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 3, “default_rt”: 720, “value”: 0, “delay”: 0 }, “503”: { “id”: 503, “name”: “Jets”, “name_index”: 45, “function”: 0, “interface”: 2, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 4, “default_rt”: 720, “value”: 1, “delay”: 0 }, “504”: { “id”: 504, “name”: “Fountain”, “name_index”: 34, “function”: 13, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 5, “default_rt”: 720, “value”: 0, “delay”: 0 }, “505”: { “id”: 505, “name”: “Pool”, “name_index”: 60, “function”: 2, “interface”: 0, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 6, “default_rt”: 720, “value”: 1, “delay”: 0 }, “507”: { “id”: 507, “name”: “Cleaner”, “name_index”: 21, “function”: 5, “interface”: 5, “flags”: 1, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 8, “default_rt”: 720, “value”: 1, “delay”: 0 }, “508”: { “id”: 508, “name”: “SPA WAT HI”, “name_index”: 96, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 9, “default_rt”: 720, “value”: 0, “delay”: 0 }, “509”: { “id”: 509, “name”: “Aux 8”, “name_index”: 9, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 10, “default_rt”: 720, “value”: 0, “delay”: 0 }, “540”: { “id”: 540, “name”: “Spa Waterfall”, “name_index”: 77, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 41, “default_rt”: 720, “value”: 0, “delay”: 0 }, “541”: { “id”: 541, “name”: “Spa High”, “name_index”: 72, “function”: 0, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 42, “default_rt”: 720, “value”: 0, “delay”: 0 }, “542”: { “id”: 542, “name”: “SPA MED”, “name_index”: 93, “function”: 0, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 43, “default_rt”: 720, “value”: 0, “delay”: 0 }, “543”: { “id”: 543, “name”: “PARTY”, “name_index”: 94, “function”: 0, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 44, “default_rt”: 720, “value”: 0, “delay”: 0 }, “545”: { “id”: 545, “name”: “Fountain 1”, “name_index”: 35, “function”: 13, “interface”: 2, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 46, “default_rt”: 720, “value”: 0, “delay”: 0 }, “546”: { “id”: 546, “name”: “spa spill v”, “name_index”: 95, “function”: 13, “interface”: 5, “flags”: 0, “color_set”: 0, “color_position”: 0, “color_stagger”: 0, “device_id”: 47, “default_rt”: 720, “value”: 0, “delay”: 0 } }, “pumps”: { “0”: { “data”: 134, “name”: “Pool Pump”, “pumpType”: 2, “state”: 1, “currentWatts”: { “name”: “Pool Pump Current Watts”, “value”: 1992, “unit”: “W”, “device_type”: “energy” }, “currentRPM”: { “name”: “Pool Pump Current RPM”, “value”: 2960, “unit”: “rpm” }, “presets”: { “0”: { “cid”: 6, “setPoint”: 1950, “isRPM”: 1 }, “1”: { “cid”: 0, “setPoint”: 2200, “isRPM”: 1 }, “2”: { “cid”: 5, “setPoint”: 2220, “isRPM”: 1 }, “3”: { “cid”: 159, “setPoint”: 2960, “isRPM”: 1 }, “4”: { “cid”: 44, “setPoint”: 3320, “isRPM”: 1 }, “5”: { “cid”: 9, “setPoint”: 3200, “isRPM”: 1 }, “6”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “7”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 } } }, “1”: { “data”: 129, “name”: “Spa Pump”, “pumpType”: 2, “state”: 1, “currentWatts”: { “name”: “Spa Pump Current Watts”, “value”: 606, “unit”: “W”, “device_type”: “energy” }, “currentRPM”: { “name”: “Spa Pump Current RPM”, “value”: 2000, “unit”: “rpm” }, “presets”: { “0”: { “cid”: 1, “setPoint”: 1750, “isRPM”: 1 }, “1”: { “cid”: 156, “setPoint”: 1750, “isRPM”: 1 }, “2”: { “cid”: 4, “setPoint”: 2000, “isRPM”: 1 }, “3”: { “cid”: 42, “setPoint”: 3100, “isRPM”: 1 }, “4”: { “cid”: 43, “setPoint”: 2500, “isRPM”: 1 }, “5”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “6”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 }, “7”: { “cid”: 0, “setPoint”: 1000, “isRPM”: 1 } } }, “2”: { “data”: 0 }, “3”: { “data”: 0 }, “4”: { “data”: 0 }, “5”: { “data”: 0 }, “6”: { “data”: 0 }, “7”: { “data”: 0 } }, “sensors”: { “air_temperature”: { “name”: “Air Temperature”, “value”: 20, “unit”: “\u00b0F”, “device_type”: “temperature” }, “ph”: { “name”: “pH”, “value”: 7.83, “unit”: “pH” }, “orp”: { “name”: “ORP”, “value”: 271, “unit”: “mV” }, “saturation”: { “name”: “Saturation Index”, “value”: -0.59, “unit”: “lsi” }, “salt_ppm”: { “name”: “Salt”, “value”: 0, “unit”: “ppm” }, “ph_supply_level”: { “name”: “pH Supply Level”, “value”: 4 }, “orp_supply_level”: { “name”: “ORP Supply Level”, “value”: 7 }, “chem_alarm”: { “name”: “Chemistry Alarm”, “value”: 1, “device_type”: “alarm” } }, “chemistry”: { “current_ph”: { “name”: “Current pH”, “value”: 7.83, “unit”: “pH” }, “current_orp”: { “name”: “Current ORP”, “value”: 271, “unit”: “mV” }, “ph_setpoint”: { “name”: “pH Setpoint”, “value”: 7.4, “unit”: “pH” }, “orp_setpoint”: { “name”: “ORP Setpoint”, “value”: 630, “unit”: “mV” }, “ph_last_dose_time”: { “name”: “Last pH Dose Time”, “value”: 42, “unit”: “Sec” }, “orp_last_dose_time”: { “name”: “Last ORP Dose Time”, “value”: 17257, “unit”: “Sec” }, “ph_last_dose_volume”: { “name”: “Last pH Dose Volume”, “value”: 119, “unit”: “mL” }, “orp_last_dose_volume”: { “name”: “Last ORP Dose Volume”, “value”: 0, “unit”: “mL” }, “ph_supply_level”: { “name”: “pH Supply Level”, “value”: 4 }, “orp_supply_level”: { “name”: “ORP Supply Level”, “value”: 7 }, “saturation”: { “name”: “Saturation Index”, “value”: -0.59, “unit”: “lsi” }, “calcium_harness”: { “name”: “Calcium Hardness”, “value”: 250, “unit”: “ppm” }, “cya”: { “name”: “Cyanuric Acid”, “value”: 18, “unit”: “ppm” }, “total_alkalinity”: { “name”: “Total Alkalinity”, “value”: 90, “unit”: “ppm” }, “salt_tds_ppm”: { “name”: “Salt/TDS”, “value”: 1000, “unit”: “ppm” }, “ph_probe_water_temp”: { “name”: “pH Probe Water Temperature”, “value”: 20, “unit”: “\u00b0F”, “device_type”: “temperature” }, “alerts”: { “flow_alarm”: { “name”: “Flow Alarm”, “value”: 0, “device_type”: “alarm” }, “ph_alarm”: { “name”: “pH Alarm”, “value”: 0, “device_type”: “alarm” }, “orp_alarm”: { “name”: “ORP Alarm”, “value”: 0, “device_type”: “alarm” }, “ph_supply_alarm”: { “name”: “pH Supply Alarm”, “value”: 0, “device_type”: “alarm” }, “orp_supply_alarm”: { “name”: “ORP Supply Alarm”, “value”: 0, “device_type”: “alarm” }, “probe_fault_alarm”: { “name”: “Probe Fault”, “value”: 0, “device_type”: “alarm” } }, “notifications”: { “ph_lockout”: { “name”: “pH Lockout”, “value”: 0 }, “ph_limit”: { “name”: “pH Daily Limit Reached”, “value”: 0 }, “orp_limit”: { “name”: “ORP Daily Limit Reached”, “value”: 0 } }, “status”: 25, “ph_dosing_state”: { “name”: “pH Dosing State”, “value”: 1 }, “orp_dosing_state”: { “name”: “ORP Dosing State”, “value”: 0 }, “flags”: 32, “firmware”: { “name”: “IntelliChem Firmware Version”, “value”: “1.040” } }, “scg”: { “scg_present”: 0, “scg_status”: { “name”: “SCG Status”, “value”: 1 }, “scg_level1”: { “name”: “Pool SCG Level”, “value”: 50, “unit”: “%” }, “scg_level2”: { “name”: “Spa SCG Level”, “value”: 0, “unit”: “%” }, “scg_salt_ppm”: { “name”: “SCG Salt”, “value”: 0, “unit”: “ppm” }, “scg_flags”: 0, “scg_super_chlor_timer”: { “name”: “SCG Super Chlorination Timer”, “value”: 0 } } } } }