Move data not possible because (internal) S2 ssd not seen as drive

Describe the issue you are experiencing

using a Mele mini pc with 128 gb emmc in the box, I run HAOS without problems. Decided to add a M.2 SSD and move the data to that drive.

Inserted the SSD directly into the slot, did not format, nor set anything in BIOS. (believing the OS would take care of all that on the Data move.

Boots successfully, but the drive is not seen as option in the Move data, where only /dev/sda is offered

which cant be done because:

My guess is this is the actual active partition, so that error message is correct.

the S2 NVMe drive is seen in All Hardware:

and all details seem in order:

Shelling in with -p 22222 fdisk -l results in

What is the used version of the Supervisor?

supervisor-2022.06.dev2101

What type of installation are you running?

Home Assistant OS

Which operating system are you running on?

Home Assistant Operating System

What is the version of your installed operating system?

Home Assistant OS 8.2

What version of Home Assistant Core is installed?

core-2022.7.0.dev20220621

Steps to reproduce the issue

1. described in the op

…

Anything in the Supervisor logs that might be useful for us?

nothing. all green

Additional information

after some serious support with pvizeli and falstaff321 I was asked to file an issue in Supervisor

this is the sda

Ive also tried the “old fashioned” way using datactl move as described in Partition method but the command isnt recognized:

ha os datadisk list returns:

ha hw info results in:

ha hw info.txt

[pvizeli]

I know the solution. Should be fix until end of July

[Mariusthvdb]

ok I wont,

Ill leave it up to @pvizeli then, he’s in charge 😉