Home couldn't connet to this accessory[update info]

I do can find a near by homebridge when I scan the picture or enter the code It will start pairing and but can’t finish After minutes,Couldn’t add homebridge Try to run with Debugs mode

npm@5.6.0
node@v8.11.0
homebridge@0.4.38

{
        "bridge": {
                "name": "Homebridge",
                "username": "A1:36:ED:EF:AC:26",
                "port": 51826,
                "pin": "297-26-913"
        }
}

EventedHTTPServer [::ffff:192.168.1.160] New connection from client +16m
EventedHTTPServer [::ffff:192.168.1.160] HTTP server listening on port 34455 +6ms
EventedHTTPServer [::ffff:192.168.1.160] HTTP request: /pair-setup +30ms
HAPServer [A2:35:ED:EF:AC:26] HAP Request: POST /pair-setup +3ms
HAPServer [A2:35:ED:EF:AC:26] Pair step 1/5 +9ms
EventedHTTPServer [::ffff:192.168.1.160] HTTP Response is finished +3m
EventedHTTPServer [::ffff:192.168.1.160] Client connection error: This socket has been ended by the other party +16ms
EventedHTTPServer [::ffff:192.168.1.160] Client connection closed +4ms
EventedHTTPServer [::ffff:192.168.1.160] HTTP connection was closed +7ms
EventedHTTPServer [::ffff:192.168.1.160] HTTP server was closed +4ms

every time it hangs at HAPServer [A2:35:ED:EF:AC:26] Pair step 1/5 +9ms I have done delete home.app, rm -rf persist and acc…, change name and pin Can you give me some advice

[Lornis]

I just had the same problem and tried everything. What worked for me was “forgetting” my WIFI from my iPhone, then connecting to it again. Hope this works for you too.

[52454D434F]

@Lornis This worked for me also. Adding this trick o the official wiki!

Port 51800 needs to be open on your NAS firewall

hi @vdrover. I had the same issue; time out on trying to add the Homebridge as an accessory to my homekit. After spending hours finding a solution, I noticed the firewall on my Synology NAS didn’t have port 51800 open for my internal network. Maybe you want to add a note about the firewall port to the official wiki too.

I hope this helps