question-mark
Stuck on an issue?

Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.

And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.

HomeBridge on raspberry PI3 + Plugins W-Xiaomi Lights =Pb with HomeKit on IphoneX

See original GitHub issue

Hello ! First, i’m a french guy and i apologize for my english… 😦 I hope everything I write will be clear…

Steps to Reproduce (for bugs)

I have installed Homebridge on my PI3 I have installed the plugin for Xiaomi lights : OK I run homebridge = OK–> The QR code appear (code = 031 - 45 - 154) On my iPhone X i have successfully add homebridge in the HomeKit (My Home) app, using the QR code For any reasons, i had to remove the home bridge on my HomeKit. And now it is impossible to add home bridge in home kit when i scan the QR code : it says that the accessory already exists in my home and that i have to reset it. How can i reset home bridge in order to work again in HomeKit ?

Thank you for your help 😃 Thierry

Versions

  • Homebridge: 0.4.44
  • Node: v6.14.3
  • OS: Running terminal on MacBook Pro with OSEl capitan 10.11.6

Configuration


Homebridge Log / Command Output

Here after, the log just after the launch of homebridge (QR code)
[7/7/2018, 4:32:16 PM] [homebridge-yeelight.yeelight] DidFinishLaunching
no ble cap, skip ble device discovery
[7/7/2018, 4:32:16 PM] Homebridge is running on port 41629.
add to multicast group
listen on 0.0.0.0
no did or loc found!
[7/7/2018, 4:32:16 PM] [homebridge-yeelight.yeelight] cached accessory: 0x0000000004982c65
[7/7/2018, 4:32:16 PM] [homebridge-yeelight.yeelight] cached accessory: 0x000000000498504a
already in device list!
already in device list!
connect ok!
[7/7/2018, 4:32:17 PM] [homebridge-yeelight.yeelight] accesseory reachable
[7/7/2018, 4:32:17 PM] [homebridge-yeelight.yeelight] dev connected 0x0000000004982c65 true
connect ok!
[7/7/2018, 4:32:17 PM] [homebridge-yeelight.yeelight] accesseory reachable
[7/7/2018, 4:32:17 PM] [homebridge-yeelight.yeelight] dev connected 0x000000000498504a true
already in device list!
already in device list!
0x0000000004982c65 property change: power value: 1
[7/7/2018, 4:32:20 PM] [homebridge-yeelight.yeelight] update accessory prop: powervalue: 1
0x000000000498504a property change: power value: 1
[7/7/2018, 4:32:20 PM] [homebridge-yeelight.yeelight] update acce

Issue Analytics

  • State:closed
  • Created 5 years ago
  • Comments:5

github_iconTop GitHub Comments

1reaction
alessandrocrocicommented, Jul 13, 2018

have you try to delete the cached accessory?

0reactions
stale[bot]commented, Jul 12, 2019

This issue has been automatically marked as stale because it has not had recent activity, and will be closed if no further activity occurs. If this issue was overlooked, forgotten, or should remain open for any other reason, please reply here to call attention to it and remove the stale status. Thank you for your contributions.

Read more comments on GitHub >

github_iconTop Results From Across the Web

Homebridge for RaspberryPi on the App Store
Everything is controlled by you and your iPhone while Homerbidge works as a bridge between Apple's HomeKit on your iPhone / iPad and...
Read more >
Homebridge
Homebridge allows you to integrate with smart home devices that do not natively support HomeKit. There are over 2,000 Homebridge plugins supporting thousands...
Read more >
How to make YeeLight smart bulb compatible with HomeKit ...
How to make YeeLight smart bulb compatible with HomeKit by Raspberry Pi and HomeBridge · Step 1 : Install the system and log...
Read more >
(Help) - Upgrade plugIn Xiaomi Plant Care : r/homebridge
Hi everyone, I just have a small question : the plugin works fine (read humidity temperature light) but I would like to show...
Read more >
Homebridge on Raspberry Pi: How to Run It
Homebridge enables non-HomeKit devices to work with Apple home automation. Read on to learn more about Homebridge Raspberry Pi setups.
Read more >

github_iconTop Related Medium Post

No results found

github_iconTop Related StackOverflow Question

No results found

github_iconTroubleshoot Live Code

Lightrun enables developers to add logs, metrics and snapshots to live code - no restarts or redeploys required.
Start Free

github_iconTop Related Reddit Thread

No results found

github_iconTop Related Hackernoon Post

No results found

github_iconTop Related Tweet

No results found

github_iconTop Related Dev.to Post

No results found

github_iconTop Related Hashnode Post

No results found