Air Conditioner config
See original GitHub issueI’m not really sure how to get Air Conditioner work properly. Maybe, I’m missing something or didn’t setup correctly?
- To get the off hex code, I turned on my aircon and turned it off and go the hex code for off
- To get 16 degree (min on my aircon), I set my aircon to 17 degree, and capture hex code for 16 degree
- To get 30 degree (max on my aircon and it only cools), I set my aircon to 29 degree, and capture hex code for 16 degree
The aircon I’m using is Piu’ 14 http://www.olimpiasplendid.com.au/portable-air.html
I have few questions regarding Home app
- what’s the temperature inside blue circle? I get 12c. Is this static icon?
- i can toggle between 0 and 30. I tried to add min temperature to be 16 just above data ie “minTemperature”: 16, and “minTemperature”: “16”, but in both cases it crashed Home app.
At launch:
[3/31/2017, 1:17:19 PM] [Broadlink RM] getTargetHeatingCoolingState (off)
[3/31/2017, 1:17:19 PM] [Broadlink RM] getTargetTemperature (0)
[3/31/2017, 1:17:19 PM] [Broadlink RM] getTemperatureDisplayUnits (0)
[3/31/2017, 1:17:19 PM] [Broadlink RM] getCurrentHeatingCoolingState
[3/31/2017, 1:17:19 PM] [Broadlink RM] getCurrentTemperature (12.1)
Launching air conditioner:
[3/31/2017, 1:20:34 PM] [Broadlink RM] setTargetHeatingCoolingState (cool)
[3/31/2017, 1:20:34 PM] [Broadlink RM] Potentially sendTemperature (16)
[3/31/2017, 1:20:34 PM] [Broadlink RM] sendTemperature (16, cool)
[3/31/2017, 1:20:34 PM] [Broadlink RM] setTargetTemperature (16)
[3/31/2017, 1:20:34 PM] [Broadlink RM] Potentially sendTemperature (16)
[3/31/2017, 1:20:34 PM] [Broadlink RM] Payload message sent to Broadlink RM device (192.168.1.4; 37:27:04:01:a8:c0)
Asking Siri to set temperature to 20 degree but its still at 16.
[3/31/2017, 1:21:35 PM] [Broadlink RM] setTargetTemperature (20)
[3/31/2017, 1:21:35 PM] [Broadlink RM] Potentially sendTemperature (20)
[3/31/2017, 1:21:35 PM] [Broadlink RM] Update to default temperature (16)
From Home app, I tried to toggle from 16 to 20 but it still didn’t work.
[3/31/2017, 1:23:52 PM] [Broadlink RM] getTargetHeatingCoolingState (cool)
[3/31/2017, 1:23:52 PM] [Broadlink RM] getTargetTemperature (16)
[3/31/2017, 1:23:52 PM] [Broadlink RM] getTemperatureDisplayUnits (0)
[3/31/2017, 1:23:52 PM] [Broadlink RM] getCurrentHeatingCoolingState
[3/31/2017, 1:23:52 PM] [Broadlink RM] getCurrentTemperature (12.2)
[3/31/2017, 1:27:05 PM] [Broadlink RM] setTargetTemperature (18)
[3/31/2017, 1:27:05 PM] [Broadlink RM] Potentially sendTemperature (18)
[3/31/2017, 1:27:05 PM] [Broadlink RM] Update to default temperature (16)
[3/31/2017, 1:27:06 PM] [Broadlink RM] setTargetTemperature (19)
[3/31/2017, 1:27:06 PM] [Broadlink RM] Potentially sendTemperature (19)
[3/31/2017, 1:27:06 PM] [Broadlink RM] Update to default temperature (16)
[3/31/2017, 1:27:07 PM] [Broadlink RM] setTargetTemperature (20)
[3/31/2017, 1:27:07 PM] [Broadlink RM] Potentially sendTemperature (20)
[3/31/2017, 1:27:07 PM] [Broadlink RM] Update to default temperature (16)
My config:
{
"name": "Air Conditioner",
"type": "air-conditioner",
"data": {
"off": "260016016f370e0d0e0e0e0d0e0e0e0d0e0e0e290e0d0f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e290e0d0e290f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e290e290e290e0d0f0d0e0e0e0d0e290e0e0e290e0d0e0e0e290e0d0f0d0e0d0f290e0d0e0e0e290e0d0e290e290e0e0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e290e0d0e0e0e0d0e0e0e0d0f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0d0f0d0e0e0e290e0d0e290e290e0e0e0d0e0e0e0d0f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e290e0d0e290f290e290e0d0e0e0e000d050000",
"temperature30": {
"pseudo-mode": "heat",
"data": "260016016f360f0d0e0e0f0c0e0e0e0d0e0e0e29100b0e0e100b0e0e0e0d0f0d0e0e0e0d0e0e100b100c0e290e0d0e290e0e0e0d100c100b100c0e0e0e0d0e0e0e0d0e0e0e2910270e290e0d0e0e0e0d0f0d0e290e0e0e0d100c0e0d0e290e0e0e0d0e0e0e290e0e0e0d0e290e0e0e290e29100b0e0e0e0d0e0e0e0d0f0d0e0e0e0d10270e0e0e0d0e0e0e0d0e0e0e0d0e29100c0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d100c0e0d0e0e0e0d10270f0d0e290e290e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e100b0e0e0e0d0e0e0e0d100c0e0d0f0d0e0e0e0d0e290e29100c10270e290e290e0d0f0d0e000d050000"
},
"temperature16": {
"pseudo-mode": "cool",
"data": "260016016e370e0e0e0d0e0e0e0d0e0e0e0d0f280f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f280f0d0e290e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f280f2910270e0d0e0e0e0d0e0e0e290e0d0f0d0e0e0e0d0e290e0e0e0d0e0e0e290e0d0e0e0e0d0f280f290e0d0f0d0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f280f0d0e0e0e0d0e0e100b0e0e0e290e0d100c100b0e0e0e0e0e0d0e0e100b0e0e0e0d0e0e0e0d0e0e0e290e0d0e290f280f0d0e0e0e0d0e0e0e0d100c0e0d0e0e0e0d0e0e0e0d0f0d0e0d0f0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d100b0f0d0e0e100b0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0e0e0e0d0f0d0e0e0e290e0d0e290e290e290e290f0d0e0d0f000d050000"
}
}
},
Issue Analytics
- State:
- Created 6 years ago
- Comments:26 (13 by maintainers)
Top Results From Across the Web
Air Conditioning System Configurations
Air Conditioning System Configurations · Condenser (outdoor coil). · Condenser fan. · Hermetic compressor. · Capillary tube. · Evaporator (indoor conditioning coil).
Read more >Adjust Your Air-Conditioner Settings - The Spruce
The US Department of Energy recommends setting air-conditioning at 78 F when you are home and setting it higher when you are away...
Read more >Air Conditioner Remote Controls & AC Settings - Cielo WiGle
Most AC's have 4 settings for the fan: low, medium, high, and auto. The auto fan setting automatically regulates the fan speed as...
Read more >Best Setting for Your Central Air Conditioning
What's the best setting for central air conditioning? According to Consumer Reports' nationally representative survey, most folks keep their ...
Read more >Understanding Air Conditioning Settings: An Expert Guide
For the most energy-efficient operation of your air conditioner, experts recommend setting the temperature at between 24 and 27 degrees in ...
Read more >Top Related Medium Post
No results found
Top Related StackOverflow Question
No results found
Troubleshoot Live Code
Lightrun enables developers to add logs, metrics and snapshots to live code - no restarts or redeploys required.
Start FreeTop Related Reddit Thread
No results found
Top Related Hackernoon Post
No results found
Top Related Tweet
No results found
Top Related Dev.to Post
No results found
Top Related Hashnode Post
No results found
Top GitHub Comments
Try:
oh yeah! oops
i fixed it above! i was changing few things after pasting my config, and mixed up the values .