luci-network: TypeError while editing wireless network on second radio on gl-mt1300_v1

Steps to reproduce:

1. Perform a fresh install or reset on hardware with two radios, such as GL-iNet MT1300. (This isn’t required, but ensures starting from a clean install.)
2. Go to: Network → Wireless
3. Ensure one wireless network on each radio, adding wireless networks as needed (defaults for networks ok).
4. Edit second wireless network (radio1.network1), change SSID, then click Save, then click Dismiss. (Save doesn’t dismiss dialog like expected, possibly start of bugged behavior)
5. Click Edit button for the second wireless network again.

Actual behavior:

UI presents the error “TypeError chan.options[0] is undefined” and no edit dialog is shown.

Expected behavior:

The dialog for editing wireless network is displayed.

Additional Information:

root@OpenWrt:~# cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='21.02.3'
DISTRIB_REVISION='r16554-1d4dea6d4f'
DISTRIB_TARGET='ramips/mt7621'
DISTRIB_ARCH='mipsel_24kc'
DISTRIB_DESCRIPTION='OpenWrt 21.02.3 r16554-1d4dea6d4f'
DISTRIB_TAINTS=''

Some other notes:

• What exactly is edited on the wireless networks doesn’t seem to matter, but SSID consistently reproduces.
• Adding a new wireless network on the second wireless interface (radio1) gives the same error.
• Editing wireless networks on the second wireless interface works as expected prior to editing the wireless network on the first radio.
• This works on a GL-AR750S with OpenWrt 19.07.3 and 21.02.3 (after installing kernel modules for hardware support). I’m not sure why the hardware would matter.

[jow-]

Yes, 22.03 will include the relevant changes. Closing this as it is already solved.

[66schoollane]

Yes, 22.03 will include the relevant changes. Closing this as it is already solved.

hi jow how do i update to 22.03 just flashed from OpenWrt 21.02.3 r16554-1d4dea6d4f / LuCI openwrt-21.02 branch git-22.083.69138-0a0ce2a