Stuck on an issue?

Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.

And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.

[BUG] Roller shutter changed to "Closing" in the logs but in reality it is "Opening"

See original GitHub issue

Environment

ShellyForHASS release with the issue: 0.1.8
Last working ShellyForHASS release (if known): no one
Home Assistant Core release with the issue: 0.112.3
Operating environment (Home Assistant/Supervised/Docker/venv): HassOS 4.11

Describe the bug

When the roller shutter is Opening I see in the log that is Closing. Also the automations are not working for this bug, if I set a trigger on Opening it is triggered on Closing.

Steps to Reproduce

Set this settings on Shelly 2.5: INPUT BUTTOS MODE: Open & Close Buttons… BUTTON TYPE: Momentary SWAP INPUTS: checked REVERSE DIRECTIONS: checked (probably this is the main reason of the bug)

Expected behavior

Support the REVERSE DIRECTIONS setting.

Screenshots

Traceback/Error logs

Additional context

Issue Analytics

State:
Created 3 years ago
Comments:7 (3 by maintainers)

Top GitHub Comments

1reaction

giovesoftcommented, Aug 4, 2020

For me it was a wire issue. Inverted the wires and removed the “reverse” setting and it works as expected

Il giorno mar 4 ago 2020 alle ore 11:53 Juanpa notifications@github.com ha scritto:

I have the same problem. This is not a wire issue cause I had test all possibilities and it still inverted in HA

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/StyraHem/ShellyForHASS/issues/346#issuecomment-668501240, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAHI2JMCHCIAG2O6UAEVTMLR67LBNANCNFSM4OUWRDTQ .

0reactions

juanpa669commented, Aug 4, 2020

I have the same problem. This is not a wire issue cause I had test all possibilities and it still inverted in HA

EDIT: Yes it’s a bad wires connection. I have tried to inverse wire on the roller switch but we have to invert O1 and O2 to make it works on the right way.