Stuck on an issue?
Lightrun Answers was designed to reduce the constant googling that comes with debugging 3rd party libraries. It collects links to all the places you might be looking at while hunting down a tough bug.
And, if you’re still stuck at the end, we’re happy to hop on a call to see how we can help out.
[Device Support Request] TS011F 4 plugs surge protector
See original GitHub issueIs your feature request related to a problem? Please describe.
I’ve just bought “Tuya Zigbee Smart Surge Protector, EU Outlet With 4 Plugs and 2 USB Port” https://www.aliexpress.com/item/1005001867863311.html
It basically works in ZHA but doesn’t give an ability to change behavior after power outage.
Before all my experiments I’ve checked device in Tuya Smart application with Tuya Zigbee gateway. There such behavior works as expected, it can be set to On, Off and Restore previous state.
Describe the solution you’d like I need an ability to change behavior after power outage.
Device signature - this can be acquired by removing the device from ZHA and pairing it again from the add devices screen. Be sure to add the entire content of the log panel after pairing the device to a code block below this line.
{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress|RxOnWhenIdle|MainsPowered|FullFunctionDevice: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0xe000",
"0xe001"
],
"out_clusters": [
"0x000a",
"0x0019"
]
},
"2": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0xe000",
"0xe001"
],
"out_clusters": []
},
"3": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0xe000",
"0xe001"
],
"out_clusters": []
},
"4": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0xe000",
"0xe001"
],
"out_clusters": []
},
"5": {
"profile_id": 260,
"device_type": "0x010a",
"in_clusters": [
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0xe000",
"0xe001"
],
"out_clusters": []
},
"242": {
"profile_id": 41440,
"device_type": "0x0061",
"in_clusters": [],
"out_clusters": [
"0x0021"
]
}
},
"manufacturer": "_TZ3000_o005nuxx",
"model": "TS011F",
"class": "zigpy.device.Device"
}
Additional context I use Home Assistant Core version core-2021.11.0b0 and zha-device-handlers version 0.0.63
I’ve added next class to zha-device-handlers/zhaquirks/tuya/ts011f_plug.py
class Plug_4AC_2USB(CustomDevice):
"""Tuya 4 outlet + 2 USB surge protector with restore power state support."""
signature = {
MODEL: "TS011F",
ENDPOINTS: {
# <SimpleDescriptor endpoint=1 profile=260 device_type=266
# device_version=1
# input_clusters=[0, 3, 4, 5, 6, 57344, 57345]
# output_clusters=[10, 25]>
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaClusterE000.cluster_id,
TuyaClusterE001.cluster_id,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
# <SimpleDescriptor endpoint=2 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaClusterE000.cluster_id,
TuyaClusterE001.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=3 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaClusterE000.cluster_id,
TuyaClusterE001.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=4 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaClusterE000.cluster_id,
TuyaClusterE001.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=5 profile=260 device_type=266
# device_version=1
# input_clusters=[3, 4, 5, 6, 57344, 57345]
# output_clusters=[]>
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
OnOff.cluster_id,
TuyaClusterE000.cluster_id,
TuyaClusterE001.cluster_id,
],
OUTPUT_CLUSTERS: [],
},
# <SimpleDescriptor endpoint=242 profile=41440 device_type=97
# device_version=1
# input_clusters=[]
# output_clusters=[33]>
242: {
PROFILE_ID: 41440,
DEVICE_TYPE: 97,
INPUT_CLUSTERS: [],
OUTPUT_CLUSTERS: [GreenPowerProxy.cluster_id],
},
},
}
replacement = {
ENDPOINTS: {
1: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Basic.cluster_id,
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffRestorePowerCluster,
TuyaClusterE000,
TuyaClusterE001,
],
OUTPUT_CLUSTERS: [Time.cluster_id, Ota.cluster_id],
},
2: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffRestorePowerCluster,
TuyaClusterE000,
TuyaClusterE001,
],
OUTPUT_CLUSTERS: [],
},
3: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffRestorePowerCluster,
TuyaClusterE000,
TuyaClusterE001,
],
OUTPUT_CLUSTERS: [],
},
4: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffRestorePowerCluster,
TuyaClusterE000,
TuyaClusterE001,
],
OUTPUT_CLUSTERS: [],
},
5: {
PROFILE_ID: zha.PROFILE_ID,
DEVICE_TYPE: zha.DeviceType.ON_OFF_PLUG_IN_UNIT,
INPUT_CLUSTERS: [
Identify.cluster_id,
Groups.cluster_id,
Scenes.cluster_id,
TuyaZBOnOffRestorePowerCluster,
TuyaClusterE000,
TuyaClusterE001,
],
OUTPUT_CLUSTERS: [],
},
},
}
Have placed the updated file into custom_quirks_path and HA has recognized the device. After that I have access to an attribute power_on_state (id: 0x8002) of TuyaZBOnOffRestorePowerCluster. Initial value of the attribute is TZBPowerOnState.LastState. All my attempts to set value other that 0 gives None as value of the attribute. If I set 0 as value of the attribute next get returns value TZBPowerOnState.LastState.
In the log I see next:
Logger: zigpy.zcl
Source: /usr/local/lib/python3.9/site-packages/zigpy/zcl/__init__.py:371
First occurred: 08:51:27 (5 occurrences)
Last logged: 08:52:01
[0x15c9:1:0x0006] invalid literal for int() with base 10: 'TZBPowerOnState.LastState'
[0x15c9:1:0x0006] invalid literal for int() with base 10: 'None'
What I may to do in order to resolve the issue?
Issue Analytics
- State:
- Created 2 years ago
- Comments:12 (12 by maintainers)
Top Results From Across the Web
TS011F / TZ3000 Outlet switches all relays / incorrect quirks ...
It gives me four switches for outlets and one switch for 5V power. ... 4 outlet + 2 USB surge protector with restore...
Read more >Smart Power Strip, ZigBee Surge Protector with 4 ...
Smart Power Strip, ZigBee Surge Protector with 4 Individually Controlled Smart Outlets and 2 USB Ports, Compatible with Alexa and Google Home, 5Feet...
Read more >The 5 Best Surge Protectors of 2022 | Reviews by Wirecutter
It has four fewer outlets than our top pick and no additional ports (coaxial, phone, or USB), but that's a small sacrifice if...
Read more >TuYa TS011F_plug_1 control via MQTT | Zigbee2MQTT
Model, TS011F_plug_1. Vendor, TuYa. Description, Smart plug (with power monitoring). Exposes, switch (state), power_outage_memory, indicator_mode, power, ...
Read more >Plug-In Power Surge Protectors | Al's Plumbing - Plano Texas
These protect connected devices from small &, recurring power surges that originate inside the home. These power surges occur when a high-demand ......
Read more >
Top Related Medium Post
No results found
Top Related StackOverflow Question
No results found
Troubleshoot Live Code
Lightrun enables developers to add logs, metrics and snapshots to live code - no restarts or redeploys required.
Start Free
Top Related Reddit Thread
No results found
Top Related Hackernoon Post
No results found
Top Related Tweet
No results found
Top Related Dev.to Post
No results found
Top Related Hashnode Post
No results found
Yes, make it please
PR made and merged so likely its coming in HA 2021.12 😃)