Black screen after install on fresh C2

Describe the bug

My comma two stopped working a couple weeks ago - it will power on but once it goes past the Comma logo startup the screen turns black (with the backlight still on). I was able to get into fastboot and do a factory reset via eon-neos, but once it finished installing openpilot it returned to a black screen. Same results with installing dashcam.

Install logs:

`Pre-checkout found dinfo 1920x1080 egl version 1.4 egl w 1920 h 1080 gl version OpenGL ES 3.2 V@145.0 (GIT@I0ac3940325) remote: Enumerating objects: 61, done. remote: Counting objects: 100% (61/61), done. remote: Compressing objects: 100% (34/34), done. remote: Total 40 (delta 23), reused 21 (delta 4), pack-reused 0 Unpacking objects: 100% (40/40), done. From https://github.com/commaai/openpilot

• branch release2 -> FETCH_HEAD
• [new branch] release2 -> origin/release2 Branch ‘release2’ set up to track remote branch ‘release2’ from ‘origin’. Switched to a new branch ‘release2’ HEAD is now at aee971b Hotfix: revert DM model update (#21450) INFO:root:System time valid Using interface ‘wlan0’ OK 3 3 /data/openpilot/launch_chffrplus.sh: line 35: echo: write error: No such device /data/openpilot/launch_chffrplus.sh: line 63: /proc/irq/184/smp_affinity_list: No such file or directory /data/openpilot/launch_chffrplus.sh: line 63: /proc/irq/185/smp_affinity_list: No such file or directory /data/openpilot/launch_chffrplus.sh: line 63: /proc/irq/186/smp_affinity_list: No such file or directory pid 209’s current scheduling policy: SCHED_OTHER pid 209’s current scheduling priority: 0 pid 209’s new scheduling policy: SCHED_FIFO pid 209’s new scheduling priority: 52 pid 210’s current scheduling policy: SCHED_OTHER pid 210’s current scheduling priority: 0 pid 210’s new scheduling policy: SCHED_FIFO pid 210’s new scheduling priority: 52 pid 319’s current scheduling policy: SCHED_OTHER pid 319’s current scheduling priority: 0 pid 319’s new scheduling policy: SCHED_FIFO pid 319’s new scheduling priority: 52 pid 320’s current scheduling policy: SCHED_OTHER pid 320’s current scheduling priority: 0 pid 320’s new scheduling policy: SCHED_FIFO pid 320’s new scheduling priority: 52 Result: Parcel(00000000 00000001 ‘…’) System time valid getting pilotauth starting process ui preimporting selfdrive.locationd.calibrationd preimporting selfdrive.controls.controlsd preimporting selfdrive.loggerd.deleter preimporting selfdrive.monitoring.dmonitoringd preimporting selfdrive.logmessaged preimporting selfdrive.pandad preimporting selfdrive.locationd.paramsd preimporting selfdrive.controls.plannerd preimporting selfdrive.controls.radard preimporting selfdrive.rtshield preimporting selfdrive.thermald.thermald preimporting selfdrive.tombstoned preimporting selfdrive.updated preimporting selfdrive.loggerd.uploader manager start {‘environ’: environ({‘SHELL’: ‘/system/comma/usr/bin/bash’, ‘TMUX’: ‘/data/data/com.termux/files/usr/tmp//tmux-0/default,1818,0’, ‘PREFIX’: ‘/usr’, ‘NUMEXPR_NUM_THREADS’: ‘1’, ‘GIT_SSH_COMMAND’: ‘ssh -i /data/gitkey’, ‘ANDROID_BOOTLOGO’: ‘1’, ‘EDITOR’: ‘vim’, ‘PWD’: ‘/data/openpilot/selfdrive/manager’, ‘OPENBLAS_NUM_THREADS’: ‘1’, ‘REQUIRED_NEOS_VERSION’: ‘17’, ‘SYSTEMSERVERCLASSPATH’: ‘/system/framework/org.cyanogenmod.platform.jar:/system/framework/org.cyanogenmod.hardware.jar:/system/framework/services.jar:/system/framework/ethernet-service.jar:/system/framework/wifi-service.jar’, ‘EXTERNAL_STORAGE’: ‘/sdcard’, ‘LD_PRELOAD’: ‘libsigchain.so’, ‘HOME’: ‘/data/data/com.termux/files/home’, ‘AGNOS_VERSION’: ‘0.18’, ‘LANG’: ‘en_US.UTF-8’, ‘PYTHONSTARTUP’: ‘/data/data/com.termux/files/home/.pythonrc’, ‘LD_SHIM_LIBS’: ‘/system/lib/hw/camera.msm8996.so|libcamera_shim.so’, ‘VECLIB_MAXIMUM_THREADS’: ‘1’, ‘ANDROID_CACHE’: ‘/cache’, ‘QT_QPA_EGLFS_PHYSICAL_WIDTH’: ‘151’, ‘ANDROID_DATA’: ‘/data’, ‘ANDROID_STORAGE’: ‘/storage’, ‘PYTHONPATH’: ‘/data/openpilot’, ‘TERM’: ‘xterm-256color’, ‘TERMINFO’: ‘/system/etc/terminfo’, ‘VIMINIT’: ‘source $MYVIMRC’, ‘TMUX_PANE’: ‘%0’, ‘ASEC_MOUNTPOINT’: ‘/mnt/asec’, ‘QT_QPA_EGLFS_HIDECURSOR’: ‘1’, ‘SHLVL’: ‘1’, ‘QT_QPA_FONTDIR’: ‘/usr/share/fonts’, ‘VALGRIND_LIB’: ‘/usr/lib/valgrind’, ‘ANDROID_ROOT’: ‘/system’, ‘BOOTCLASSPATH’: ‘/system/framework/core-libart.jar:/system/framework/conscrypt.jar:/system/framework/okhttp.jar:/system/framework/core-junit.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/telephony-common.jar:/system/framework/voip-common.jar:/system/framework/ims-common.jar:/system/framework/apache-xml.jar:/system/framework/org.apache.http.legacy.boot.jar’, ‘PASSIVE’: ‘0’, ‘LD_LIBRARY_PATH’: ‘/data/phonelibs:/data/data/com.termux/files/usr/lib’, ‘MYVIMRC’: ‘/data/data/com.termux/files/home/.vimrc’, ‘QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS’: ‘/dev/input/event1:rotate=270’, ‘OMP_NUM_THREADS’: ‘1’, ‘STAGING_ROOT’: ‘/data/safe_staging’, ‘PATH’: ‘/usr/local/bin:/data/data/com.termux/files/usr/bin:/data/data/com.termux/files/usr/sbin:/data/data/com.termux/files/usr/bin/applets:/bin:/sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin’, ‘ANDROID_PROPERTY_WORKSPACE’: ‘9,0’, ‘MKL_NUM_THREADS’: ‘1’, ‘QT_QPA_EGLFS_PHYSICAL_HEIGHT’: ‘74’, ‘ANDROID_ASSETS’: ‘/system/app’, ‘OLDPWD’: ‘/data/openpilot’, ‘_’: ‘./manager.py’, ‘DONGLE_ID’: ‘8b94ce9faacf1b02’, ‘CLEAN’: ‘1’})} selfdrive/loggerd/bootlog.cc: bootlog to /data/media/0/realdata/boot/2021-07-11–13-40-02.bz2 starting daemon manage_athenad starting process sensord starting python selfdrive.loggerd.deleter starting python selfdrive.logmessaged starting python selfdrive.pandad starting python selfdrive.thermald.thermald starting python selfdrive.tombstoned Connecting to panda starting python selfdrive.updated starting python selfdrive.loggerd.uploader {“event”: “CPR”, “data”: {“/sys/kernel/debug/regulator/pm8994_s11/voltage”: “725000”, “/sys/kernel/debug/cpr3-regulator/gfx/aging_failed”: “0”, “/sys/kernel/debug/cpr3-regulator/gfx/aging_succeeded”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/aging_adj_volt”: “1355”, “/sys/kernel/debug/cpr3-regulator/gfx/thread_count”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/cpr_closed_loop_enable”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner_count”: “9”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/fuse_combo”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/cpr_rev_fuse”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/speed_bin_fuse”: “0”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/target_quots”: “0 0 0 0 0 0 350 332 485 491 513 523 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/last_volt”: “575000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/open_loop_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/ceiling_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/floor_volt”: “525000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/current_corner/index”: “3”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/target_quots”: “0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/last_volt”: “400000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/open_loop_volt”: “400000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/ceiling_volt”: “400000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/floor_volt”: “400000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/gfx_corner/corner/index”: “1”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/max_aggregated_params/target_quots”: “0 0 0 0 0 0 350 332 485 491 513 523 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/max_aggregated_params/last_volt”: “580000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/max_aggregated_params/open_loop_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/max_aggregated_params/ceiling_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/thread0/max_aggregated_params/floor_volt”: “525000”, “/sys/kernel/debug/cpr3-regulator/gfx/max_aggregated_voltages/last_volt”: “575000”, “/sys/kernel/debug/cpr3-regulator/gfx/max_aggregated_voltages/open_loop_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/max_aggregated_voltages/ceiling_volt”: “590000”, “/sys/kernel/debug/cpr3-regulator/gfx/max_aggregated_voltages/floor_volt”: “525000”, “/sys/kernel/debug/cpr3-regulator/apcc/aging_failed”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/aging_succeeded”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/aging_adj_volt”: “1875”, “/sys/kernel/debug/cpr3-regulator/apcc/apm_threshold_volt”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread_count”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/use_hw_closed_loop”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/cpr_closed_loop_enable”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner_count”: “27”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/ldo_mode_allowed”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/ldo_mode”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/fuse_combo”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/cpr_rev_fuse”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/speed_bin_fuse”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/target_quots”: “0 0 0 0 0 0 0 647 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/last_volt”: “710000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/open_loop_volt”: “750000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/ceiling_volt”: “750000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/floor_volt”: “670000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/current_corner/index”: “16”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/target_quots”: “0 0 0 0 0 0 0 268 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/last_volt”: “555000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/open_loop_volt”: “555000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/ceiling_volt”: “555000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/floor_volt”: “475000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/apc1_corner/corner/index”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/max_aggregated_params/target_quots”: “0 0 0 0 0 0 0 647 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/max_aggregated_params/last_volt”: “710000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/max_aggregated_params/open_loop_volt”: “750000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/max_aggregated_params/ceiling_volt”: “750000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread1/max_aggregated_params/floor_volt”: “670000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner_count”: “19”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/fuse_combo”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/cpr_rev_fuse”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/speed_bin_fuse”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/target_quots”: “0 0 0 0 0 0 0 647 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/last_volt”: “725000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/open_loop_volt”: “745000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/ceiling_volt”: “745000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/floor_volt”: “665000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/current_corner/index”: “12”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/target_quots”: “0 0 0 0 0 0 0 213 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/last_volt”: “540000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/open_loop_volt”: “540000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/ceiling_volt”: “540000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/floor_volt”: “475000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_cbf_corner/corner/index”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner_count”: “20”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/ldo_mode_allowed”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/ldo_mode”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/fuse_combo”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/cpr_rev_fuse”: “2”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/speed_bin_fuse”: “0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/target_quots”: “0 0 0 0 0 0 0 650 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/last_volt”: “715000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/open_loop_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/ceiling_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/floor_volt”: “680000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/current_corner/index”: “16”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/target_quots”: “0 0 0 0 0 0 0 273 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/last_volt”: “555000”, " /sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/open_loop_volt": “555000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/ceiling_volt”: “555000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/floor_volt”: “475000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/apc0_pwrcl_corner/corner/index”: “1”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/max_aggregated_params/target_quots”: “0 0 0 0 0 0 0 650 0 0 0 0 0 0 0 0”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/max_aggregated_params/last_volt”: “745000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/max_aggregated_params/open_loop_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/max_aggregated_params/ceiling_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/thread0/max_aggregated_params/floor_volt”: “680000”, “/sys/kernel/debug/cpr3-regulator/apcc/max_aggregated_voltages/last_volt”: “725000”, “/sys/kernel/debug/cpr3-regulator/apcc/max_aggregated_voltages/open_loop_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/max_aggregated_voltages/ceiling_volt”: “760000”, “/sys/kernel/debug/cpr3-regulator/apcc/max_aggregated_voltages/floor_volt”: “680000”}} deviceState: Reader was evicted, reconnecting sensord ui deleter logmessaged pandad thermald tombstoned updated uploader managerState: Reader was evicted, reconnecting sensord ui deleter logmessaged pandad thermald tombstoned updated uploader {“event”: “STATUS_PACKET”, “count”: 0, “pandaState”: null, “location”: null, “deviceState”: {“deviceState”: {“freeSpacePercent”: 97.56057739257812, “batteryPercent”: 97, “batteryStatus”: “Discharging”, “fanSpeedPercentDesired”: 0, “started”: false, “usbOnline”: false, “startedMonoTime”: 0, “thermalStatus”: “green”, “batteryCurrent”: 624080, “batteryVoltage”: 4209875, “chargingError”: false, “chargingDisabled”: false, “memoryUsagePercent”: 22, “cpuUsagePercent”: 36, “networkType”: “wifi”, “offroadPowerUsageUwh”: 0, “networkStrength”: “great”, “carBatteryCapacityUwh”: 3000000, “cpuTempC”: [42.70000076293945, 39.400001525878906, 37.79999923706055, 37.79999923706055], “gpuTempC”: [36.0], “memoryTempC”: 40.099998474121094, “batteryTempC”: -27.5, “ambientTempC”: 30.0, “lastAthenaPingTime”: 0}, “logMonoTime”: 428996382645, “valid”: true}} sensord ui deleter logmessaged pandad thermald tombstoned updated uploader sensord ui deleter logmessaged pandad thermald tombstoned updated uploader sensord ui deleter logmessaged pandad thermald tombstoned updated uploader sensord ui deleter logmessaged pandad thermald tombstoned updated uploader sensord ui deleter logmessaged pandad thermald tombstoned updated uploader upload (‘boot/2021-07-11–13-40-02.bz2’, ‘/data/media/0/realdata/boot/2021-07-11–13-40-02.bz2’) over wifi {“event”: “upload”, “key”: “boot/2021-07-11–13-40-02.bz2”, “fn”: “/data/media/0/realdata/boot/2021-07-11–13-40-02.bz2”, “sz”: 59563} checking ‘boot/2021-07-11–13-40-02.bz2’ with size 59563 uploading ‘/data/media/0/realdata/boot/2021-07-11–13-40-02.bz2’ sensord ui deleter logmessaged pandad thermald tombstoned updated uploader upload_url v1.3 https://commadata2.blob.core.windows.net/commadata2/8b94ce9faacf1b02/boot/2021-07-11--13-40-02.bz2?se=2021-07-12T18%3A40%3A09Z&sp=cw&sv=2018-03-28&sr=b&sig=7j20GvnEFE%2BAELqdJMLowOlVY8obWn7ogBKGIkcgZms%3D {‘x-ms-blob-type’: ‘BlockBlob’} sensord ui deleter logmessaged pandad thermald tombstoned updated uploader {“event”: “upload_success”, “key”: “boot/2021-07-11–13-40-02.bz2”, “fn”: “/data/media/0/realdata/boot/2021-07-11–13-40-02.bz2”, “sz”: 59563, “debug”: true} upload done, success=True`

Device/Version information (please complete the following information):

• Device: Comma two
• Dongle ID: N/A (since install is unavailable)
• Version: 0.8.5, NEOS version 17
• Car make/model: Toyota Corolla 2018

[rimas8541]

Just read thru this thread. Received my brand new C2 on Saturday. Same exact issue. Starts up, gets to the Comma logo startup screen, then goes black with the screen backlight still on. this occurs both plugged into the vehicle using the supplied harness and plugged into my Mac. I’ve tried powering off and back on and rebooting. Figured another example of same issue might be helpful.

[rrudden]

I am having the exact same issue. ~1 y/o comma two with identical blank screen behavior after openpilot installation. I noticed that I have a similar line in my installation log to you as well. Mine is:

/data/openpilot/launch_chffrplus.sh: line 45: echo: write error: No such device/data/openpilot/launch_chffrplus.sh: line 73: /proc/irq/184/smp_affinity_list: No such file or directory/data/openpilot/launch_chffrplus.sh: line 73: /proc/irq/185/smp_affinity_list: No such file or directory/data/openpilot/launch_chffrplus.sh: line 73: /proc/irq/186/smp_affinity_list: No such file or directorypid 209’s current scheduling policy: SCHED_OTHER

172.16.0.520211019_003309.log flashing_results.txt